Sanyo VM4500 - Manual (Page 150)

Setting the Flash Function
To activate the flash function to take pictures clearly in low light:
1. With the phone open and in Camera mode, select Options
(right softkey).
2. Select Flash and press .
3. Select an option from the following and press .
ⅷ On This Shot to activate the flash for one shot.
ⅷ On Always to activate the flash all the time.
4. Take a picture by using the phone’s main LCD as a viewfinder.
ⅷ To deactivate this feature, select Off during step 3.
Tip: The flash function will automatically be Off when you take a picture with the
clamshell closed.
Setting the Self-timer
To activate the Self-timer and get yourself in on the picture:
1. With the phone open and in Camera mode, select Options
(right softkey).
2. Highlight Self-timer and press .
3. Highlight the length of delay you want the timer to use
(10 Seconds or 5 Seconds) and press .
4. Press Start (left softkey) when you are ready to start the timer.
( appears on the lower left portion of the main LCD during
the Self-timer countdown.)
5. Get ready for the picture. When the timer is down to three
seconds, the Self-timer icon will turn red and the phone will
begin to beep.
To cancel the Self-timer after it has started:
Ⅵ Press Cancel (right softkey).
Note: While the Self-timer is active, all keys are disabled except , , and
Cancel (right softkey).
Tip: You can also activate the Self-timer in Video mode with same steps.
Section 2: Understanding Your PCS Phone
2J: Using Your Phone’s Camera 138