Sonos Multi-Room Music System - Manual (Page 46)

Chapter 2: System Setup
2-31
ZoneBridge Front
TOSLINK® digital audio out You can use a TOSLINK optical audio cable to connect
the ZonePlayer’s TOSLINK digital audio output to the
audio inputs on a separate audio component, such as an
amplifier or your home theater receiver.
Coaxial digital audio out You can use a digital coaxial cable to connect the
ZonePlayer’s coaxial digital audio output to the audio
inputs on a separate audio component, such as an
amplifier or your home theater receiver.
Connect button Press the Connect button to join the ZoneBridge to your
Sonos Multi-Room Music System.
ZoneBridge status indicator • LED Flashes white when powering up; flashes green
and white when connecting to your Sonos Multi-
Room Music System.
• LED Solid white when powered up and connected to
your Sonos Multi-Room Music System (normal
operation).
• LED Flashes amber when a fault condition is detected.
ZoneBridge
status
indicator
Connect
button