Sonos Multi-Room Music System - Manual (Page 21)

Sonos Multi-Room Music System User Guide 2-6
Step 2: Place the ZonePlayers in the rooms of your choice
Place the ZonePlayers in the rooms of your choice. If you are setting up a ZonePlayer
120/100, attach the speakers. If you are setting up a ZonePlayer 90/80, connect it to an
external amplifier.
If you are connecting a ZonePlayer 120/100
• Your speaker’s power rating should be at least 75W for 8 Ohm speakers, and at
least 150W for 4 Ohm speakers. Do not connect speakers rated at less than 4
Ohms.
3. Use your thumb or finger to firmly push the spring-loaded speaker connector post
inward to reveal the connection hole.
Note: Connect the red (+) and black (-) terminals from each speaker to the
corresponding terminals on the ZonePlayer. Mismatching of polarities will result in
weak central sound, and a distorted sense of sound direction.
When making connections, ensure that none of the strands of your speaker wire
come in contact with an adjoining terminal on the rear panel.