Step 3: install software – Sonos Multi-Room Music System User Manual
Page 23
Sonos Multi-Room Music System User Guide
2-8
Connect to a home theater or amplifier
• If you have digital inputs on your home theater or amplifier, you can use either a
TOSLINK® optical audio cable or a digital coaxial cable to connect the ZonePlay-
er 90/80’s digital output to the digital input on the receiver.
• If you have analog inputs on your home theater or amplifier, use a standard RCA
audio cable to connect a ZonePlayer’s analog audio output to the audio inputs
on the receiver.
• Select the proper input channel on the receiver.
• After you finish setting up your Sonos system, go to "Using Line-out" on page 2-
18 to adjust the volume settings.
Connect to a computer or powered speakers
• You will need a stereo mini to RCA Y-adapter audio cable (one 1/8-inch stereo
miniplug to dual RCA male connectors) to connect the ZonePlayer’s analog
audio output to the computer’s audio input.
• You may need a Y-adapter audio cable (one1/8-inch stereo miniplug to dual
RCA male connectors) to connect the speakers to the audio outputs on the
ZonePlayer. If your speakers have a male 1/8-inch stereo plug, you will need to
attach a female-to-female coupler between the speaker plug and the Y-adapter
audio cable.
For additional information on connecting audio devices, you can visit our Web site at
.
Step 3: Install software
If your operating system is Macintosh® OS X, Windows Vista™ or Windows® XP, simply
insert the Sonos System Setup CD-ROM and follow the on-screen instructions to
download and install the software, configure your music system, and set up access to
your music files.
Note: During the setup process, you will be prompted to register your Sonos
system. Your music system must be registered in order to receive future software
updates, technical support and access to free music service trials, so please be sure to
register during the setup process. We do not share your email address with other
companies.