Sanyo DSR-3709 User Manual
Page 89
GENERAL SET
4
88
English
SE
TTIN
GS
z
After “VIDEO LOSS” is detected, it can be cancelled by
performing either of the following.
(1) Input a video signal.
(2) If no video input is required, use a [CAMERA SELECT]
button to select the camera for which video loss was
detected and then press and hold the same button.
Use the following procedure to set a warning buzzer to
sound for alarms or when hard disk space becomes
insufficient.
1
Press the [MENU] button, turn the jog
dial to select “3. GENERAL SET”, and
then turn shuttle dial clockwise.
The
2
Turn the jog dial to select “2. BUZZER
SET”, and then turn the shuttle dial
clockwise.
The
(1) ALARM (default setting: OFF)
Sounds the buzzer when a alarm occurs.
(2) DISK FULL (default setting: ON)
Sounds the buzzer when overwriting is forbidden and
the hard disk capacity becomes insufficient.
(3) DISK ERROR (default setting: ON)
Sounds a buzzer when a hard-disk error occurs.
(4) LOCK WARNING (default setting: ON)
Sounds a buzzer if a button is pressed while the
security lock is on. Specifically, the buzzer sounds
twice with an interval of approximately 0.5 seconds.
(5) KEY IN (default setting: OFF)
Sounds the buzzer when a button is pressed.
(6) NON REC (default setting: OFF)
A buzzer is sounded upon loss of recording.
3
Turn the shuttle dial clockwise.
“OFF” flashes for “ALARM”.
4
Turn the jog dial to display “ON”, and
then turn the shuttle dial clockwise.
[Settings] ( indicates default setting)
Use the above procedure whenever necessary to
change buzzer settings (ON or OFF).
5
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
z
To stop a buzzer, press any button or turn either the jog
dial or shuttle dial.
Setting the buzzer
MENU
ALARM : OFF
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
(1)
(2)
(3)
(4)
(5)
(6)
Setting
Description
OFF
The buzzer is not sounded when an alarm is
generated.
ON
The buzzer is sounded when an alarm is generated.
ALARM : ON
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
EXIT/OSD
e00_l8hbg_us_7.book Page 88 Thursday, November 25, 2004 1:44 PM