Sanyo DSR-3709 - Manual (Page 72)

RECORD SET 3
English
71
\
You can set a storage period for recorded data as
described below. When the set period has expired, the
corresponding data will be automatically deleted.
1
Turn the jog dial to select “AUTO
DELETE”, and then turn the shuttle dial
clockwise.
“OFF” flashes.
2
Turn the jog dial to select the storage
period.
You can set the storage period for recorded data “OFF” or
within a range of “1 DAYS” - “99 DAYS” (full days).
3
Turn the shuttle dial clockwise.
4
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
z When setting has been completed, all data with expried
storage periods will be deleted. Before setting, copy
important data to the archive area or CompactFlash
card.
z Data in the archive area cannot be auto deleted.
Use the following procedure to make normal recording
settings for recording quality, audio recording, and
recording rate. Alternatively, a program number set using
“PROGRAM REC SET” can be specified to set these
parameters.
1
Press the [MENU] button.
The MENU indicator lights up and the
2
Turn the jog dial to select “2. RECORD
SET”, and then turn the shuttle dial
clockwise.
The screen is displayed.
3
Turn the jog dial to select “4. NORMAL
REC MODE SET”, and then turn the
shuttle dial clockwise.
The screen is displayed.
4
Turn the shuttle dial clockwise.
“ENHANCED” flashes (indicating enhanced quality
recording).
Setting auto deleting
NORMAL RECORDING AREA
OVERWRITE : ON
ALARM RECORDING AREA
OVERWRITE : ON
REMAINING DISK WARNING : **
SERIES REC : OFF
AUTO DELETE : OFF
NORMAL RECORDING AREA
OVERWRITE : ON
ALARM RECORDING AREA
OVERWRITE : ON
REMAINING DISK WARNING : **
SERIES REC : OFF
AUTO DELETE : 10 DAYS
EXIT/OSD
Setting normal recording
MENU
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
REC RATE : 15FPS ( 35H)
REC PROGRAM GROUP : OFF
e00_l8hbg_us_7.book Page 71 Thursday, November 25, 2004 1:44 PM