Sun Microsystems X6450 - Manual (Page 42)

32 Sun Blade X6450 Server Module Installation Guide • May 2009
Dongle Cable Connections
The dongle cable, which is shipped with your chassis, allows you to connect directly
to the front of your server module, as shown in
FIGURE 2-7 .
Note – The dongle cable has either three or four connectors. FIGURE 2-7 shows a
dongle with four connectors. The three-connector dongle does not have the DB9
serial console connector (1).
To connect to the system console:
■ Connect a keyboard and mouse to the USB connector.
■ Connect a monitor to the VGA connector.
The dongle cable is designed for occasional service use. For routine operation, use
the ILOM.
FIGURE 2-7 Dongle Cable Connections
1
2
3
4