To connect to the ilom cli, Figure 2-3 – Sun Microsystems X6450 User Manual
Page 36
26
Sun Blade X6450 Server Module Installation Guide • May 2009
2. Type your user name and password.
The default user is root, and the default password is changeme, all in lowercase
characters.
Note –
After you log in to the SP using the default user name and password, you
should change the the root account password (changeme). See the corresponding SP
documentation collection for details.
3. Click Log In.
The web interface Versions page appears.
FIGURE 2-3
Versions Page for ILOM 3.0
▼ To Connect to the ILOM CLI
You can access the ILOM CLI remotely through a Secure Shell (SSH) or serial
connection. Secure Shell connections are enabled by default.
If you do not know the ILOM’s IP address, find it as described in
Service Processor’s IP Address” on page 24
The following procedure shows an example using an SSH client on a UNIX system.
Use an appropriate SSH client for your operating system. The default user name is
root
and default password is changeme.