Sun Microsystems X6450 - Manual (Page 19)

Chapter 1 Introduction 9
■ Sun Blade RAID 0/1 G2 Expansion Module
■ Sun Blade 6000 Multi-Fabric Network Express Module
The following devices require a F540-7821-01 or newer motherboard, with 2.0
software installed. The motherboard part number appears on the motherboard, and
can be read using the service processor.
■ Sun Dual 10GbE Fabric Expansion Module
The combinations, and the configurations they support appear in TABLE 1-1 .
FIGURE 1-2 shows a Sun Blade X6450 server module in slot 0 and a Sun Blade 6000
Disk Module in slot 1, with a pair of Sun Blade 6000 10GbE Multi-Fabric Network
Express Modules.
TABLE 1-1 SAS Connection Summary
REM SAS-NEM Module Supported Connections
Sun Blade RAID 5 Expansion Module, or
Sun Blade RAID 0/1 G2 Expansion Module NEM None
Sun Blade RAID 5 Expansion Module, or
Sun Blade RAID 0/1 G2 Expansion Module Sun Blade 6000 Multi-Fabric
Network Express Module Sun Blade 6000 Disk Module
External SAS connectors
Sun Blade RAID 5 Expansion Module, or
Sun Blade RAID 0/1 G2 Expansion Module Sun Blade 6000 10GbE Multi-Fabric
Network Express Module
Note -
This SAS-NEM also
supports the 10GbE Ethernet
connectors. See
“External
Connecton to the 10 GbE Ethernet
Connections” on page 10
.
Sun Blade 6000 Disk Module
External SAS connectors