Sherwood R-963 - Manual (Page 47)

ENGLISH
47
Each time these buttons are pressed, “ ” and “ ” are
moved to the corresponding mode.
Each time these buttons are pressed, the modes change as
follows according to the selected item :
Only when playing program sources in analog stereo or digital 2 ch PCM format, the SOURCE DIRECT can be selected.
On : Select this to achieve the pure sound quality.
When this is selected, the stereo mode is automatically selected and the pure sound that bypasses the tone circuitry
will be heard.
Off : Select this to cancel the source direct function.
Notes :
When the SOURCE DIRECT is set to On, DECODING MODE, surround mode and CINEMA EQ cannot be selected.
When you select the 7.1 CH DIRECT as input source or the digital signals from DTS, Dolby Digital or MPEG sources,
etc. are input, the source direct function is automatically canceled.
When 96 kHz PCM(2 channel stereo) signals are input or the source direct function is selected, the cinema EQ
function can not be selected.
On : Select this to compensate for edgy or shrill movie sound tracks.
Off : Select this to cancel the cinema EQ function.
Notes :
Only when the digital input is selected as signal input, the decoding mode and the surround mode can both be selected as
desired.
When the analog input is selected, only the surround mode can be selected as desired.
OFF
OSD POWER
MAIN PAGE FAV
MUTE
CH/ SET VOL
RETURN
DISC DISP
MI
ROOM 2
1 STEREO
7.1 SURR
CH
2 3
4 5 6
7 8 9
0 ENT
M2 M3
AUTO DSP
RNC-500
OFF
OSD POWER
MAIN PAGE FAV
MUTE
CH/ SET VOL
RETURN
DISC DISP
MI
ROOM 2
1 STEREO
7.1 SURR
CH
2 3
4 5 6
7 8 9
0 ENT
M2 M3
AUTO DSP
RNC-500
To select the source direct function for pure sound quality or not.
To select the desired decoding mode.
To select the desired surround mode.
To select the cinema EQ function or not.
S U R R O U N D S E T U P
R E T U R N : B a c k , : S e l e c t
S O U R C E D I R E C T :
D E C O D I N G M O D E :
D O L B Y D I G I T A L
C I N E M A E Q :
Off
Off
AUTO
Press the CURSOR UP( )/DOWN( ) buttons to select the desired item.
1
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired mode.
2
SETTING THE SURROUND SETUP
When selecting the SOURCE DIRECT
When selecting the CINEMA EQ