Sherwood R-963 - Manual (Page 27)

27
Downmixing into 2 front channels
To cancel the 2 - CH downmix mode, select the
desired surround mode with using the MULTI
CONTROL knob or the DSP MODE button, etc.
When the playback of the source on the player is
stopped or interrupted, etc, the 2 - CH downmix
mode is not canceled even though “ DTS”,
“DOLBY DIGITAL” or “MPEG” indicator goes
off.
If headphones are plugged in and the SPEAKER
A/B button is set to the off mode while the digital
signals from the DTS, Dolby Digital or MPEG
program sources are being input, it will enter the 2-
CH downmix mode automatically and if
headphones are unplugged and the SPEAKER A/B
button is set to the speaker-on mode while in the 2-
CH downmix mode, it will return to the previous
mode. Allows the multi - channel signals encoded in DTS,
Dolby Digital or MPEG format to be reproduced
through only two front speakers or through
headphones.
When the digital signals from the DTS, Dolby Digital
or MPEG program sources are input, press the
STEREO button.
“DTS”, “MPEG” or “DOLBY DIGITAL” indicator
lights up and “2 CH DOWNMIX” is scrolled,
meaning it enters the 2-CH downmix mode, and then
the discrete multi-channels(except LFE) are mixed
down into 2 front channels.
OFF
OSD POWER
MAIN PAGE FAV
MUTE
CH/ SET VOL
RETURN
DISC DISP
MI
ROOM 2
1 STEREO
7.1 SURR
CH
2 3
4 5 6
7 8 9
0 ENT
M2 M3
AUTO DSP
RNC-500
or
STEREO
STEREO
ENGLISH