Sherwood R-963 - Manual (Page 46)

ENGLISH
46
Each time these buttons are pressed, the digital re-
mastering mode changes as follows:
On : Select this to process the input signal digitally and
to convert its sampling frequency to 192 kHz for an
more detailed sound reproduction.
Off : Select this to cancel the digital re-mastering
function.
D I G I T A L R E - M A S T E R I N G
Off
L I S T E N I N G M O D E
R E T U R N : B a c k , : S e l e c t
OFF
OSD POWER
MAIN PAGE FAV
MUTE
CH/ SET VOL
RETURN
DISC DISP
MI
ROOM 2
1 STEREO
7.1 SURR
CH
2 3
4 5 6
7 8 9
0 ENT
M2 M3
AUTO DSP
RNC-500
OFF
OSD POWER
MAIN PAGE FAV
MUTE
CH/ SET
VOL
RETURN
DISC DISP
MI
ROOM 2
1 STEREO
7.1 SURR
CH
2 3
4 5 6
7 8 9
0 ENT
M2 M3
AUTO DSP
RNC-500
Press the CURSOR UP( )/DOWN( ) buttons to select the LISTENING MODE, then press the ENTER
button.
1
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired mode.
2
When selecting the LISTENING MODE
Notes:
The digital re-mastering function does affect on the front left and right signals only.
However, it does not affect on the digital signals that are output from the OPTICAL OUT jack of this unit.
When analog signals are input in the stereo mode, the 7.1 CH DIRECT is selected as an input source, or the
source direct function is selected, the digital re-mastering function is not activated.