Sherwood R-963 - Manual (Page 16)

16
ADDITIONAL INFORMATION ON REMOTE COMMAND CODES
• This receiver recognizes and responds to IR codes that are not transmitted by the supplied remote control unit.
These commands and their corresponding functions, shown on the following table, are made available for
custom installers and advanced hobbysts who are already familiar with the programming of such devices as the
Crestron Touch Screen and the Philips Pronto.
Custom Code : 8345H(NEC) Custom Code : 8345BH(NEC)
• These are codes for ROOM 2 source playback only.
ENGLISH
FUNCTIONS
MAIN
FUNCTIONS
MAIN
CODES CODES
DTS 70H VIDEO 1 56H
Dolby Digital 71H VIDEO 2 5AH
EXTRA SURROUND
44H VIDEO 3 07H 6.1/7.1
DECODING MODE 58H VIDEO 4 5BH
STEREO 4FH VIDEO 5 5DH
DIGITAL/ANALOG E1H PHONO 02H
Dolby Pro Logic
E8H TUNER 03H
II Movie
Dolby Pro Logic
E9H TAPE MONITOR 06H
II Music
DTS Neo Movie EDH AUX 0AH
DTS Neo Music EEH CD 0BH
MPEG EBH 7.1 CH DIRECT 4AH
PCM EFH SOURCE DIRECT 7BH
DSP MODE 5CH
FUNCTIONS
ROOM 2
FUNCTIONS
ROOM 2
CODES CODES
ROOM 2 91H AUX 8FH
MUTE C3H CD 8BH
VOLUME UP C7H VIDEO 1 8AH
VOLUME DOWN CBH VIDEO 2 8CH
PHONO 82H VIDEO 3 90H
TUNER 83H VIDEO 4 C2H
TAPE MONITOR 86H VIDEO 5 C1H