English – Sherwood R-963 User Manual
Page 25
ENGLISH
25
Continued
When playing some multi-channel program sources in the Extra Surround 6.1/7.1 mode.
When the digital signals from the following program sources only are input in the available decoding mode, if
these buttons are pressed, the corresponding surround mode will be selected.
Dolby Digital 5.1-channel sources(including THX Surround EX created using the Dolby Digital Surround EX
technology) : EXTRA SURROUND mode,
DTS 5.1-channel sources : DTS ES MATRIX mode.
Press the EXTRA SURROUND 6.1/7.1 button on the front panel or the 7.1 CH SURROUND button on the
remote control again to cancel the 6.1(or 7.1) surround mode.
According to whether the surround back speaker is set to “1CH” or “2CH”, the 6.1 or 7.1 mode is selected.
However, when the surround back speaker is set to “None”, the Extra Surround 6.1/7.1 mode cannot be activated.
When canceling the surround mode for normal stereo operation.
Then the stereo mode is selected.
To cancel the stereo mode, select the desired surround mode with using the MULTI CONTROL knob or the DSP
MODE button, etc.
OFF
OSD
POWER
MAIN
PAGE
FAV
MUTE
CH/
SET
VOL
RETURN
DISC
DISP
MI
ROOM 2
1
STEREO
7.1
SURR
CH
2
3
4
5
6
7
8
9
0
ENT
M2
M3
AUTO
DSP
RNC-500
or
EXTRA SURR.
6.1/7.1
7.1
SURR
OFF
OSD
POWER
MAIN
PAGE
FAV
MUTE
CH/
SET
VOL
RETURN
DISC
DISP
MI
ROOM 2
1
STEREO
7.1
SURR
CH
2
3
4
5
6
7
8
9
0
ENT
M2
M3
AUTO
DSP
RNC-500
or
STEREO
STEREO