Sherwood R-963 - Manual (Page 30)

ENGLISH
30
RECORDING
The analog signals from the 7.1 CH DIRECT inputs as well as the digital signals from the coaxial or optical
digital input can be heard but cannot be recorded.
The volume, tone (bass, treble) settings,etc. have no effect on the recording signals.
Start recording on the component hooked
up to TAPE MONITOR.
2
Select the desired input as recording source
except TAPE MONITOR.
1
Start play on the desired input.
3
Be sure that “TAPE MON” goes off.
For tape monitor function, refer to “TAPE MONITOR
function” on page 18.
Start recording on the component hooked
up to VIDEO 1.
2
Select VIDEO 2, VIDEO 3, VIDEO 4 or
VIDEO 5 as a recording source.
1
Start play on the component hooked up
to VIDEO 2, VIDEO 3, VIDEO 4 or
VIDEO 5.
3
or
VIDEO
POWER
OFF
OSD
The audio and video signals from the VIDEO 2,
VIDEO 3, VIDEO 4 or VIDEO 5 component will be
dubbed onto the VIDEO 1 and you can enjoy them on
the TV set and from the speakers.
Dubbing from video components onto
VIDEO 1
Recording with TAPE MONITOR
Select CD as the sound recording source.
2
Select VIDEO 2 as a image recording
source.
Example) When dubbing the VIDEO 2 image signal
and the CD sound signal separately onto
VIDEO 1.
1
or
VIDEO
POWER
OFF
OSD
POWER
or
AUDIO OFF
OSD
Dubbing the sound and image signals
separately onto VIDEO 1
Image source Sound source
Image source Sound source
POWER
OFF
OSD
or
AUDIO VIDEO