Siemens ADSL 500 - Manual (Page 11)

Chapter 2: Installation
7
6. Connect the supplied power adapter to the PWR port of your ADSL Router, and plug the other end to a power
outlet.
7. Turn on the power switch.
Note:
For Full Rate (G.dmt) standard, a POTS Splitter is necessary on subscriber’s premise to keep
the telephone and ADSL signals separated, giving them the capability to provide
simultaneous Internet access and telephone service on the same line. To connect a POTS
Splitter:
1. Connect the port Phone to your telephone.
2. Connect the port Modem to your ADSL Router.
3. Connect the port Line to the ADSL wall jack.