Woodstock SHOP FOX W1816 - Manual (Page 47)

-45-
W1816 Owner's Manual (Mfg. Since 10/09)
PA
RT
S
Machine Labels - Front
TIME ON/OFF
DUTY
Shop Fox Cyclone Induction Motor
Connections:
Manufactured for Woodstock in Taiwan
HEAT
WEIGHT
CLASS
DATE
HZ
SER. NO.
VOLT
OUTPUT
AMP
RPM
PHASE
3 HP
60
220
22
3450
1
Continuous
40°C
29Kgs
F Power
1 2
Grnd
READ OPERATING INSTRUCTIONS BEFORE USING!
Improper installation or application of motor may result in fire, explosion, electric short or personal injury.
MOTOR CONTAINS NO THERMAL
PROTECTION: Additional overcurrent protection must be provided to
prevent burnout and possible fire
hazard from overload or stalled motor.
Turn OFF power before servicing or
connecting. Ground the motor frame
with grounding cord, green ground
screw or green wire. Insulate any
unused lead wires individually. Terminal cover must be installed
during operation. Failure to comply
may result in serious injury.
DO NOT place your fingers or objects in motor openings or any moving
part while the motor is connected to
a power source.
WARNING!
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! All labels created by Woodstock International, Inc. are
copyrighted and must only be used on Shop Fox™ brand machines. Never use Woodstock’s label
artwork on other brands of machines.
TIME ON/OFF
DUTY
Shop Fox Cyclone Induction Motor
Connections:
Manufactured for Woodstock in Taiwan
HEAT
WEIGHT
CLASS
DATE
HZ
SER. NO.
VOLT
OUTPUT
AMP
RPM
PHASE
3 HP
60
220
22
3450
1
Continuous
40°C
29Kgs
F Power
1 2
Grnd
2H
REMO
TE C
ONTR
OL
SWIT
CH
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! All labels created by Woodstock International, Inc. are
copyrighted and must only be used on Shop Fox™ brand machines.
artwork on other brands of machines.
OPERATING DUST
COLLECTOR OR
EMPTYING BAGS!
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! All labels created by Woodstock International, Inc. are
copyrighted and must only be used on Shop Fox™ brand machines. Never use Woodstock’s label
artwork on other brands of machines.
collector to stop
before placing
hands near inlet.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
ALWAYS WEAR A
DUST MASK WHEN
OPERATING DUST
COLLECTOR OR
EMPTYING BAGS!
W1816 3 HP LOW-PROFILE
CYCLONE DUST COLLECTOR
Motor: 3 HP, 220V, Single-Phase
Motor Speed: 3450 RPM
Max. Suction Capacity: 1654 CFM
Static Pressure @ 1654 CFM: 2.2
Inlet Size: 8"
Impeller Size: 14-1/2"
Canister Filter Surface Area: 90.42 ft2
Weight: 375 lbs.
Manufactured for Woodstock in Taiwan
Date
Serial Number
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before starting.
2. Never place hands near inlet when machine is connected
to power.
3. Disconnect machine from power and make sure impeller
has come to a complete stop before performing
maintenance, service, or changing bags.
4. Always wear ANSI approved eye protection and respirator
when changing bags.
5. Connect power cord to grounded outlet only.
6. Do not wear loose clothing, gloves or jewelry. Secure long
hair and button long sleeves.
7. Never collect glass, water, or metal with dust collector.
Only collect wood fiber dust and chips.
8. Do not expose to rain or dampness.
9. Do not modify dust collector in any way.
10. Always make sure ducting is properly grounded.
11. Dispose of collected material in approved containers.
12. Never leave dust collector running unattended.
(All labels displayed here are actual size)
WARNING
WARNING! CAUTION!
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! All labels created by Woodstock International, Inc. are
copyrighted and must only be used on Shop Fox™ brand machines. Never use Woodstock’s label
artwork on other brands of machines.
UNPLUG POWER
and wait for dust
collector to stop
before placing
hands near inlet.
WARNING!
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
ALWAYS WEAR A
DUST MASK WHEN
OPERATING DUST
COLLECTOR OR
EMPTYING BAGS!
Canister Filter Surface Area: 90.42 ft
Manufactured for Woodstock in Taiwan
Date
Serial Number
7. Never collect glass, water, or metal with dust collector.
Only collect wood fiber dust and chips.
8. Do not expose to rain or dampness.
9. Do not modify dust collector in any way.
10. Always make sure ducting is properly grounded.
11. Dispose of collected material in approved containers.
12. Never leave dust collector running unattended.
WARNING! CAUTION!
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! All labels created by Woodstock International, Inc. are
copyrighted and must only be used on Shop Fox™ brand machines. Never use Woodstock’s label
artwork on other brands of machines.
UNPLUG POWER
and wait for dust
collector to stop
before placing
hands near inlet.
WARNING!
ON/OFF
TIMER
2H 4H 8H
RUN POWER OVER
REMOTE CONTROL
SWITCH
220 VOLT
W1816 Machine Labels C
(All labels displayed here are actual size)
SHOP FOX
®
W1816
W1816 Machine Labels B
(Label displayed here is actual size)
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
ALWAYS WEAR A
DUST MASK WHEN
OPERATING DUST
COLLECTOR OR
EMPTYING BAGS!
W1816 3 HP LOW-PROFILE
CYCLONE DUST COLLECTOR
Motor: 3 HP, 220V, Single-Phase
Motor Speed: 3450 RPM
Max. Suction Capacity: 1654 CFM
Static Pressure @ 1654 CFM: 2.2
Inlet Size: 8"
Impeller Size: 14-1/2"
Canister Filter Surface Area: 90.42 ft2
Weight: 375 lbs.
Manufactured for Woodstock in Taiwan
Date
Serial Number
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before starting.
2. Never place hands near inlet when machine is connected
to power.
3. Disconnect machine from power and make sure impeller
has come to a complete stop before performing
maintenance, service, or changing bags.
4. Always wear ANSI approved eye protection and respirator
when changing bags.
5. Connect power cord to grounded outlet only.
6. Do not wear loose clothing, gloves or jewelry. Secure long
hair and button long sleeves.
7. Never collect glass, water, or metal with dust collector.
Only collect wood fiber dust and chips.
8. Do not expose to rain or dampness.
9. Do not modify dust collector in any way.
10. Always make sure ducting is properly grounded.
11. Dispose of collected material in approved containers.
12. Never leave dust collector running unattended.
W1816 Machine Labels A
(All labels displayed here are actual size)
WARNING
WARNING! CAUTION!
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! All labels created by Woodstock International, Inc. are
copyrighted and must only be used on Shop Fox™ brand machines. Never use Woodstock’s label
artwork on other brands of machines.
UNPLUG POWER
and wait for dust
collector to stop
before placing
hands near inlet.
WARNING!
100
101
102
103
104
105
106
107
Safety labels warn about machine hazards and how to prevent machine damage or injury. The
owner of this machine MUST maintain the original location and readability of all labels on this
machine. If any label is removed or becomes unreadable, REPLACE that label before allowing the
machine to enter service again. Contact Woodstock International, Inc. at (360) 734-3482 or www.
shopfoxtools.com to order new labels.