Woodstock SHOP FOX W1816 - Manual (Page 21)

-19-
W1816 Owner's Manual (Mfg. Since 10/09)
SE
TU
P
20. Install the three drum lid latch assemblies with (6)
#10-24 x 3 ⁄
8
" Phillips head screws and (6) #10-24 hex
nuts, as shown in Figure 24.
Note: To avoid snagging the plastic collection bag in
the future, insert the screw from inside the drum.
Figure 24. Installing the collection drum
latch assemblies.
x 6
Figure 26. Inserting the collection drum
vacuum plate.
22. Place the collection drum vacuum beveled plate on
the bottom of the drum assembly with the widest
diameter of the plate facing up (see Figure 26).
21. Insert the collection drum vacuum pipe through the
side of the bottom drum, as shown in Figure 25,
then secure it in place with (4) 5 ⁄
16
"-18 x 3 ⁄
4
hex
bolts and (4) 5 ⁄
16
" flat washers.
Figure 25. Collection drum vacuum pipe
installed.
x 4
Vacuum
Pipe