Star Trac E-TRi - Manual (Page 39)

STAR TRAC P
ERSONAL
V
IEWING
S
CREEN
O
WNER
’
S
G
UIDE
39
Headphone Jack Replacement.
When you are experiencing poor audio output from your PVS, you should check the entertainment
headphone jack to see if it needs replacement. The headphone jack was designed for an easy and
quick replacement. Before you begin, make sure your have the proper replacement part available.
For the E-TRi use part number 715-3668. For the E-TBTi, E-STi, E-RBi, and E-UBi use part number
718-5098 .
Look under the Display unit, in the front you will
see a printed headphone screw logo. Use a #2
Phillips screwdriver to remove the screw holding
the headphone jack in place. Retain the screw
for later use.
Gently pull the Headphone jack out of the display.
Be careful, the headphone is connected to a cable.
Disconnect the cable.
Take the new Headphone jack and connect the
cable.
Slide new Headphone jack into the Display plastic
front, using the screwdriver, re-install the screw.
This completes the Headphone replacement.
Screw
Headphone Jack