Siemens 2602 - Manual (Page 19)

3-9
information.
4. Click Copy to to enter that information in the Public Port boxes on the designated line.
If an application still cannot function correctly after enabling multiple ports via the Special Application
screen, you may need to use the Virtual DMZ Host option to open the client computer for full Internet
access. (Refer to the “Miscellaneous Services” section for instructions.)
Configure Client Filtering
You can filter Internet access for local clients based on IP address, application type (i.e., HTTP port), and
time of day.
For example, the following screen indicates that clients in the address range 192.168.254.50 to
192.168.254.99 are permanently restricted from using FTP (port 21), while clients in the address range
192.168.254.110 to 192.168.254.119 are blocked from browsing the Internet from 8:00 a.m. to 5:00 p.m.,
Monday through Friday.
Figure 3-4. Advanced Setup | Client Filtering
Configure Miscellaneous Features
From the Advanced Setup | Misc screen, you can configure these additional features:
• Administrator Time-Out – Specify the amount of time of inactivity before the SpeedStream 2602
automatically closes the Administrator session. To disable this function, enter 0.
• Discard PING from WAN side – When this feature is enabled, hosts on the WAN cannot ping the
SpeedStream 2602.
• Remote Management – By default, management access is only available to users on your local network.
However, you can also manage the SpeedStream 2602 from a remote host by adding the IP address of an
administrator.