Star Micronics RS232 - Manual (Page 39)

– 35 –
STAR MODE
Commands to Set the Page Format
FUNCTION
Set page length in lines
CODE “C” n
HEX 1B 43 n
REMARKS Sets the page length using the current line spacing, where n is
between 1 and 127.
Changing the line spacing later does not alter the physical page
length.
The current line becomes the top of the page.
Resets the bottom margin.
Default page length is 42 lines.
FUNCTION
Set page length in inches
CODE “C” <0> n
HEX 1B 43 00 n
REMARKS Sets the page length to n
×
24 mm, where n is between 1 and 22.
The current line becomes the top of the page.
Resets the bottom margin.
FUNCTION
Set bottom margin
CODE “N” n
HEX 1B 4E n
REMARKS Sets the bottom margin to n lines at the current line spacing, where
n is between 0 and 127.
Bottom margin is reset when you change the page length.
Setting is invalid if the printing area on one page is 36 mm or less.
FUNCTION
Cancel bottom margin
CODE “O”
HEX 1B 4F
REMARKS Cancels the bottom margin.