Star Micronics RS232 - Manual (Page 29)

– 25 –
STAR MODE
8-2. Command Specification
Commands to Select Characters
FUNCTION
Select international character set
CODE “R” n
HEX 1B 52 n
REMARKS
Selects an international character set according to the value of n,
as shown below:
n Character set n Character set
0 U.S.A. 7 Spain I
1 France 8 Japan
2 Germany 9 Norway
3 England 10 Denmark II
4 Denmark I 11 Spain II
5 Sweden 12 Latin America
6 Italy
When the value of n is 0 to 9, 0(00H) to 9(09H) or “0”(30H) to
“9”(39H) can be set. When the value of n is 10 to 12, 10(0AH) to
12(0CH) or “A”(41H) to “C”(43H) can be set.
FUNCTION
Select zero style
CODE “/” n
HEX 1B 2F n
REMARKS
Causes subsequent zero characters to be printed with a slash when
n is 1, and without a slash when n is 0.
The value of n can be set to 0(00H) or “0”(30H), or 1(01H) or
“1”(31H).