Star Micronics RS232 - Manual (Page 35)

– 31 –
STAR MODE
FUNCTION
Sets the printing magnified double in character width.
CODE
HEX 0E
REMARKS Prints the subsequent data including a character spacing set by
n, magnified double in character width.
FUNCTION
Resets the printing magnified in character width.
CODE
HEX 14
REMARKS Resets the printing magnified in character width set by ,
“W”n and “i”n1n2.
FUNCTION
Sets the magnification rate in character width.
CODE “W” n
HEX 1B 57 n
REMARKS Prints the subsequent data including a character spacing set by
n, magnified in character width by a rate specified by
the value of n.
n Character width n Character width
0 Unmagnify 3 Quadruple
1 Double 4 Quintuple
2 Triple 5 Sextuple
The value of n can be set to 0(00H) to 5(05H) or “0”(30H) to
“5”(35H).
FUNCTION
Sets the printing magnified double in character height.
CODE
HEX 1B 0E
REMARKS Prints the subsequent data magnified double in character height.
FUNCTION
Resets the printing magnified in character height.
CODE
HEX 1B 14
REMARKS Resets the printing magnified in character height set by
, “h”n and “i”n1n2.