Samsung Digimax 201 - Manual (Page 80)

80
Please check the following
BEFORE CONTACTING A SERVICE CENTER
Symptom
The camera doesn’t
switch on
The camera powers
down whilst in use
Batteries drain
quickly
Camera does not
take images when
pressing the Shutter
button
The images are
unclear
The flash does not
fire
Incorrect date and
time is displayed
Causes
There is low battery capacity
An AC Power Adapter is not connected
The batteries are exhausted
The Camera is turned off automatically
due to the Auto power function
The Adapter plug is not connected
securely
The Camera is being used in low
temperatures
Mixing old and new batteries or
battery types
The internal memory is full
The CARD has not been formatted.
The memory is exhausted
The camera power is off
The batteries are exhausted
The mode dial is positioned
incorrectly
An Incorrect focus mode is selected.
FLASH OFF mode has been selected
The date and time have been set
incorrectly.
Remedy
Insert fresh batteries
Connect an AC Power Adapter
Insert fresh batteries
Slide the power switch to reactivate
camera
Remove and re-insert the plug
Keep the camera in warm conditions
(i.e. inside a coat or jacket) and only
remove it in order to take images
Insert fresh batteries (all of which
should be of the same type)
After turning the camera off, insert a
new card or delete a stored image.
Format the memory
Insert a new card
Turn the camera power on
Insert fresh batteries
Change the camera working mode to
the RECORDING mode.
Select a correct focus mode related
to the distance
Disengage FLASH OFF mode
Reset the date and time correctly
(p.71)