Samsung Digimax 201 - Manual (Page 78)

78
IMPORTANT NOTES
If the digital camera is not used for a long period, an electric discharge can occur. It is a
good idea to remove the batteries and the CARD, the camera is not used for some time.
If the camera is exposed to electronic interference, it will turn itself off to protect the
CARD.
Maintenance
Use a soft brush (available from photo stores) to GENTLY clean the lens and LCD
assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be
used.
Clean the camera body with a soft cloth. Do not allow this camera to come into contact
with solvent materials such as benzol, insecticide, thinners etc.
This may damage the body shell of the camera and also affect its performance.
Rough handling can damage the LCD monitor. Take care to avoid damage and keep
the camera in its protective carry case at all times when not in use.
DO NOT attempt to disassemble or modify the camera. It contains delicate parts and
there are high voltage circuits that can cause electric shocks.
Under certain conditions, static electricity can cause the flash unit to fire.
This is not harmful to the camera and is not a malfunction.
When images are uploaded or downloaded, the data transfer may be affected by static
electricity. In this case, disconnect and re-connect the USB cable before trying the
transfer again.