Samsung Digimax 201 - Manual (Page 33)

33
ADV
ANCED
Starting Recording Mode
RECORDING MODE
1. Insert the batteries (p.25). Insert the batteries taking note of the polarity (+ / -).
2. Insert the CARD (p.28). As this camera has an 8MB internal memory, you do not need to insert the
SD memory card. If the CARD is not inserted, an image will be stored in the internal memory. To
expand memory capacity, insert the CARD. If the CARD is inserted, an image will be stored on the
CARD.
3. Close the card cover.
4. Slide the power switch to turn on the camera.
5. Select the STILL IMAGE mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image
by using either the viewfinder or LCD monitor.
7. Press the shutter button to capture an image.
Recording a still image
If the CARD is inserted in the camera, all the camera functions are applied only to the CARD.
If the CARD is not inserted in the camera, all the camera functions are applied only to the internal
memory.