Samsung Digimax 201 - Manual (Page 46)

46
RECORDING MODE
IMAGE SIZE
In the STILL IMAGE mode, you can select the image size.
A large image uses more memory, so increasing image size will reduce the total number of shots you
can store on a memory.
The image sizes are listed below.
Selecting the image size
1. Turn the camera power on.
2. Select the STILL IMAGE mode by rotating the mode dial.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display the menu on the LCD
monitor.
5. Press the UP( )/ DOWN ( ) button and select [IMAGE SIZE].
6. Press the SET( ) button and the sub menu will display.
7. Press the UP( )/ DOWN ( ) button and select [L], [M] or [S].
8. Press the SET( ) button to confirm the setting.
The default is [1600x1200 (L)].
9. Press the MENU button to cancel the menu display.
1600x1200 1280x960 640X480
STILL IMAGE
IMAGE SIZE
QUALITY
WHITE BALANCE AUTO
EXPOSURE 0.0
EXIT:MENU CHANGE:
STILL IMAGE mode
STILL IMAGE
IMAGE SIZE
1600X1200
1280X960
640X480
EXIT:MENU SET: