Samsung Digimax 201 - Manual (Page 47)

47
ADV
ANCED
RECORDING MODE
Selecting the image quality
1. Turn the camera power on.
2. Select the STILL IMAGE mode by rotating the mode dial.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display the menu on the LCD
monitor.
5. Press the UP( )/ DOWN ( ) button and select [QUALITY].
6. Press the SET( ) button and the sub menu will be displayed.
7. Press the UP( )/ DOWN ( ) button and select [SUPERFINE
], [FINE] or [NORMAL].
8. Press the SET( ) button to confirm the setting.
The default is [FINE].
9. Press the MENU button to cancel the menu display.
SUPER FINE FINE NORMAL
IMAGE QUALITY
In the STILL IMAGE mode, you can select the image quality(Data compression rate).
The higher the QUALITY setting, the better the final image will be. However, the high quality
setting will require more memory and therefore reduce the number of images you can store on
the memory. SUPER FINE is the highest quality and NORMAL is the lowest setting. Choose the
setting appropriate for your needs. The image qualities are listed below.
STILL IMAGE
QUALITY
SUPER FINE
FINE
NORMAL
EXIT:MENU SET:
STILL IMAGE
IMAGE SIZE
QUALITY
WHITE BALANCE AUTO
EXPOSURE 0.0
EXIT:MENU CHANGE: