Samsung Digimax 201 - Manual (Page 30)

30
Removing the SD memory card
PREPARATION
1. Turn the power off using the power switch.
2. Open the card cover and press the CARD as shown in
the image and release.
3. Remove the CARD and close the card cover.
NOTICE
Don’t remove the CARD when the camera status LED(green) is blinking as this may cause
damaged data in the CARD.
Instructions on how to use the SD memory card
Using a new CARD for the first time
Before using the CARD, it must be initialized.
Initializing prepares the memory for recording data.
Refer to page 63 for information on [FORMAT].