Samsung Digimax 201 - Manual (Page 65)

65
ADV
ANCED
NOTICE
An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but
will NOT be protected from the [FORMAT] function.
Protect
This is used to protect specific shots from accidental erasing (LOCK).
It also releases images that have been previously protected (UNLOCK).
1. Turn the camera power on.
2. Select the PLAY mode by rotating the mode dial.
3. Do not turn the LCD monitor off.
4. Select an image that you want to protect by pressing the
UP( )/ DOWN ( ) button.
5. Press the MENU button to display the menu on the LCD
monitor.
6. Press the UP( )/ DOWN ( ) button and select [PROTECT].
7. Press the SET( ) button and the sub menu will display.
8. Select [LOCK] or [UNLOCK] by pressing the UP( )/ DOWN
( ) button and press the SET( ) button.
- LOCK : Sets up the PROTECT function.
- UNLOCK : Discards the protect function
9. When you protect an image, the protect indicator will display
on the LCD monitor.
Protect indicator
The unprotected image does not have indicator.
PLAY MODE
PLAY
PROTECT
LOCK
UNLOCK
EXIT:MENU SET:
PLAY
DELETE
SLIDE SHOW 2 SEC
PROTECT UNLOCK
# OF PRINTS X1
EXIT:MENU CHANGE: