Samsung Digimax 201 - Manual (Page 41)

41
ADV
ANCED
SELF-TIMER( )/ UP( ) button
When the menu is displayed on the LCD monitor, pressing the
UP button ( ) makes the menu cursor move up.
When the menu is not displayed on the LCD monitor, the
LEFT (
) button operates as the SELF-TIMER button in
RECORDING(STILL IMAGE/ MOVIE) mode.
This function is used when the photographer would also like to
be in the image.
Selecting the self-timer
The self-timer activates only in RECORDING(STILL IMAGE/
MOVIE CLIP) mode.
Use a tripod or place the camera on a stable surface.
1. Do not turn the LCD monitor off.
2. Select RECORDING(STILL IMAGE/ MOVIE CLIP) mode by rotating the mode dial.
3. If the self-timer indicator is displayed on the LCD monitor by pressing the SELF-TIMER button, the
setting is completed.
Press the self-timer button again, and the self-timer is canceled.
4. Pressing the shutter button will allow an interval of ten seconds before the image is taken. After that,
the self-timer is cancelled.
If you select [MANUAL] sub menu in [TIME] MOVIE CLIP mode menu, the movie clip can be
recorded as long as the memory allows. To stop the recording, press the shutter button.
RECORDING MODE
THUMBNAIL/ LEFT( ) button
In RECORDING(STILL IMAGE, MOVIE CLIP) mode, there are no functions in the LEFT( ) button.
When the menu is not displayed on the LCD monitor, pressing the RIGHT( ) button activates as a
Thumbnail button.
You can view 9 images at a time on the LCD monitor in thumbnail mode.