Samsung Digimax 201 - Manual (Page 36)

36
RECORDING MODE
Using the camera button to adjust the camera
The STILL IMAGE/MOVIE CLIP mode function can be set up by using the camera button.
POWER switch
Used for turning the camera power on / off.
The camera power will be turned off automatically during
periods of inactivity. This is done to reduce battery drain. The
camera can be reactivated by sliding the power switch again.
SHUTTER button
Used for taking images for RECORDING (STILL IMAGE/
MOVIE CLIP).
LCD button
Pressing the LCD button in the RECORDING (STILL IMAGE,
MOVIE CLIP) mode will change the display as shown below.