Siemens HIPATH 3000 - Manual (Page 39)

Using Other Functions/Services
39
Step by Step
Change call number (relocate)
You can put your call number on every other available
telephone when it is set up (contact the service person-
nel).
Your previous telephone then receives the old call
number of your new telephone. The call number togeth-
er with the settings (e.g. programmed keys) of the tele-
phone are changed.
Precondition: Your old and new telephone are the first
telephones at each connection. The telephone are in
idle state.
The following procedure is carried out on the new tele-
phone.
n
Lift the handset.
qmhem
Enter the code.
o
Enter your own call number.
o
Enter code (telephone lock) Æ Page 36.
(This is not necessary if you have not determined a code
yet).
rmhem
Enter the code.
You can, however, connect your telephone to an-
other connection and carry out the procedure.