Siemens HIPATH 3000 - Manual (Page 25)

Making Calls – Convenience Functions
25
Step by Step
Retrieving a Parked Call
Precondition: One or more calls have been parked. The
telephone is idle.
n
Lift the handset.
rij
Enter the code.
d
...
m
Enter the park slot number you noted earlier.
If the park slot number you enter is not in use, you can-
not retrieve the call.
Picking up (Retrieving) a Held Call
Precondition: One or more calls have been parked. The
telephone is idle.
n
Lift the handset.
qjg
Enter the code.
o
Enter the line number you noted earlier.
Conducting a Conference
In a conference call, you can talk to as many as four oth-
er parties at the same time. These may be internal or
external users.
n
Lift the handset.
o
Call the first party.
Press the key. LED flashes.
o
Call the second station. Announce the conference.
qg
Press the key. Enter the code. The LED goes out.
A tone sounds every 30 seconds to indicate that a con-
ference is in progress. Contact the service personnel for
instructions on how to turn it off.
If a parked call is not picked up, after a specific
period of time the call is returned to the tele-
phone from where it was parked (recall).
Consultation
Consultation