Siemens HIPATH 3000 User Manual
Page 18
Step by Step
Making Calls – Convenience Functions
18
Answering Calls from the Entrance Telephone
and Opening the Door
If an entrance telephone has been programmed, you
can use your telephone to speak to someone at the
entrance telephone and to activate a door opener.
If you are authorized to activate a door opener (contact
the service personnel), visitors can open the door them-
selves by entering a 5-digit code (e.g. using a DTMF
transmitter or installed keypad).
Speaking to visitors via the entrance telephone:
Precondition: Your telephone rings.
n
Lift the handset within thirty seconds. You are connect-
ed to the entrance telephone immediately.
or
n
Lift the handset after more than thirty seconds.
o
Dial the entrance telephone number.
Opening the door from your telephone during a call
from the entrance telephone:
qje
Press the key. LED flashes. Enter the code.
o
w
Dial the entrance telephone number.
Opening the door with a code (at the door):
o
After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.
Consultation
Special features must be taken into considera-
tion if your telephone operates with
HiPath 5000 RSM (system networking via PC
network)