Chapter 4 making network connections, Connecting network devices, Twisted-pair devices – SMC Networks 10/100 User Manual
Page 47: Cabling guidelines, Making network connections -1, Cabling guidelines -1, Hapter, Aking, Etwork, Onnections
4-1
C
HAPTER
4
M
AKING
N
ETWORK
C
ONNECTIONS
Connecting Network Devices
The TigerSwitch 10/100 is designed to be connected to 10 or 100 Mbps
network cards in PCs and servers, as well as to other switches and hubs. It
may also be connected to remote devices using the optional fiber optic
modules.
Twisted-Pair Devices
Each device requires a shielded or unshielded twisted-pair (STP or UTP)
cable with RJ-45 connectors at both ends. For 1000BASE-T Category 5,
5e, or 6 cable is required, for 100BASE-TX connections, Category 5 or
better cable is required; and Category 3 or better cable for 10BASE-T
connections.
Cabling Guidelines
The RJ-45 ports on the switch support automatic MDI/MDI-X pinout
configuration, so you can use standard straight-through twisted-pair cables
to connect to any other network device (PCs, servers, switches, hubs, or
routers).
See “Cables” on page B-1 for further information on cabling.