SMC Networks 10/100 - Manual (Page 28)

A
BOUT THE
T
IGER
S
WITCH
10/100
1-8
Power Supply Receptacle
The power receptacle is located on the rear panel of the switch. The
standard power receptacle is for the AC power cord.
Figure 1-8 Power Supply Receptacle
Features and Benefits
Connectivity
• 16 dual-speed ports for 10 or 100 Mbps Ethernet connections
• Auto-negotiation enables each RJ-45 port to automatically select the
optimum communication mode (half or full duplex) if this feature is
supported by the attached device; otherwise the port can be configured
manually
• Independent RJ-45 10/100BASE-T ports with support for automatic
MDI/MDI-X
• Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or
better for 10 Mbps connections and Category 5 or better for 100 Mbps
connections, and Category 5, 5e, or 6 for 1000 Mbps connections
• IEEE 802.3 Ethernet and 802.3u Fast Ethernet, 802.3z and 802.3ab
Gigabit Ethernet compliance ensures compatibility with
standards-based hubs, network cards and switches from any vendor
100-240V~ 50-60Hz 0.8A