Sharp FO-5700 User Manual
Page 69
Making Copies
67
4.
Making
C
opies
Checking copy jobs in memory
You can display the status of copy jobs in memory by following the
steps below. You can also cancel copy jobs with this procedure.
1
Press the MEM. STATUS key (flip
up the Rapid Key overlay) and then
the 1 key.
COPY STATUS will appear in the
display.
2
Press the # key or the
* key to scroll
through the list of copy jobs. The time
the original was scanned into memory
will appear in the display, together
with the 3-digit memory number
assigned to the job. To cancel a copy
job, press the CLEAR key and then
the START key while the copy job
appears in the display.
3
When you have finished checking the
list, press the STOP key twice to
return to the date and time display.
W
MEM.STATUS
or
1
STOP
STOP
all-FO4700.book Page 67 Friday, June 11, 1999 1:57 PM