Sharp FO-5700 - Manual (Page 139)

Blocking Reception of Unwanted Faxes
137
5. S
pecial
Functions
Blocking Reception of Unwanted Faxes
The Anti Junk Fax function allows you to block reception of faxes
from parties which you specify. This saves paper by not printing out
unwanted "junk" faxes.
To use this function, first turn it on by setting Option Setting 20 (Anti-
Junk Fax) to YES as explained in Chapter 6, and then enter the fax
numbers from which you do not want to receive faxes as shown
below.
♦
Up to 50 numbers can be entered in the Anti Junk Number List.
♦
To clear a number from the Anti Junk Number List, you need to
know the 2-digit number which identifies it. If you have forgotten
this number, print out the Anti Junk Number List as explained in
Chapter 7.
1
Press these keys:
The display will show:
2
Press 1 to enter a number in the Anti
Junk Number List, or 2 to clear a
number from the list.
8:STORE JUNK FAX #
1=SET, 2=CLEAR
or
SET CLEAR
2
FUNCTION
3
1
8
all-FO4700.book Page 137 Friday, June 11, 1999 1:57 PM