Sharp FO-5700 - Manual (Page 43)

Programming Auto-Dial Numbers
41
2. S
ending
D
o
cument
s
Programming Auto-Dial Numbers
You can dial a fax number by simply pressing a Rapid Key, or by
pressing the SPEED DIAL key and entering an abbreviated Speed
Dial number.
To use a Rapid Key or Speed Dial number, you must first program the
full fax number in the Rapid Key or Speed Dial number. It is usually
convenient to program your most frequently dialed numbers in Rapid
Keys.
♦
Forty-eight Rapid Keys are available. Rapid Dial Keys also allow
you to program a backup fax number, which is automatically dialed
if the first fax number is busy.
♦
Seventy-five Speed Dial numbers are available on the FO-4700/FO-
5550, and one hundred Speed Dial numbers are available on the
FO-5700.
1
Press these keys:
The display will show:
2
Press the 1 key.
The display will show:
FUNCTION
3
1
3
Press the 1 key to select SET.
1
3:ENTRY MODE
ENTER #(1-9,
*
,#)
1:FAX/TEL. # MODE
1=SET, 2=CLEAR
all-FO4700.book Page 41 Friday, June 11, 1999 1:57 PM