Sharp FO-5700 - Manual (Page 45)

Programming Auto-Dial Numbers
43
2. S
ending
D
o
cument
s
7
Enter the name of the party by
pressing the letter entry keys
(max.of 20 characters). (Make sure
the Rapid Key overlay is flipped
down.)
•
If you don’t want to enter a name,
go directly to Step 8.
8
Press the START key.
Example: SHARP
9
Press 1 if the number programmed is
an area code or access code to be used
for Chain Dialing (see Chain Dialing
at the end of this procedure). Press 2
(or START) if the number is a regular
fax number.
•
If you pressed 1 or are
programming a Speed Dial number,
go to Step 14. (Note: A backup fax
number cannot be entered in a
Rapid Key used for Chain Dialing.)
SET CANCEL
or
10
Enter a backup fax number to be
dialed if the first number is busy.
(If you don’t want to enter a backup
number, go directly to Step 13.)
(Example)
11
Press the START key.
A S H R P
1 2
3 2 1 4 4 1 1
START
START
all-FO4700.book Page 43 Friday, June 11, 1999 1:57 PM