Sharp FO-5700 - Manual (Page 150)

Optional Settings
148
Note for FO-4700: This setting will only appear if your dealer has
installed the paper cassette option and Option Setting 33 (Seperate
Mode) is turned off.
Note for FO-5550/FO-5700: This setting will not appear if Option
Setting 33 (Separate Mode) is turned on.
♦
Initial setting: 1
Setting 17: RETRANSMISSION TIMES
This sets the number of times the fax will reattempt a memory
transmission which has been interrupted by a line error or power
failure. Enter any 2-digit number from 01 to 14, or enter 00 to turn off
the function.
♦
Initial setting: 10
Setting 18: RETRANSMISSION INTERVAL
You can select the number of minutes the fax waits between each
memory retransmission attempt. Enter 01 for 1 minute, 02 for 2
minutes, etc., up to a maximum of 15 minutes. If you do not want the
fax to wait between attempts, enter 00.
♦
Initial setting: 02
Setting 19: HEATER MODE
To conserve power, you can turn off the laser printer heater in your fax
machine. When this is done, the heater will turn on automatically
when you receive a document (there will be a slight delay before
printing while it warms up) and turn off when printing is completed.
Press 2 to turn off the heater, or 1 to keep it on.
♦
Initial setting: 2
Setting 20: ANTI-JUNK FAX
Press 1 to block reception from fax numbers entered in the Anti Junk
Fax List. Press 2 to allow reception from all numbers.
♦
Initial setting: 2
all-FO4700.book Page 148 Friday, June 11, 1999 1:57 PM