Sharp FO-5700 - Manual (Page 52)

Sending a Fax by Automatic Dialing
50
Speed Dialing
If the number you want to dial has been programmed in a Speed Dial
number, you can dial it by pressing the SPEED DIAL key and then
entering the Speed Dial number.
1
Load the document(s).
SEND READY will appear in the
display.
•
Set the resolution and/or contrast if
desired.
•
To send the document ahead of
other documents waiting for
transmission, press the PRIORITY
key.
•
To send the document directly from
the feeder (not through memory),
press the DOCUMENT key.
2
Press the SPEED DIAL key and then
enter the Speed Dial number by
pressing the numeric keys.
•
If you enter less than 2 digits for the
Speed Dial number on the FO-
4700/FO-5550, or 3 digits on the
FO-5700, press the START key to
complete the entry.
Example: Speed Dial 1
1
SPEED DIAL
RESOLUTION
Q
CONTRAST
DOCUMENT
PRIORITY
all-FO4700.book Page 50 Friday, June 11, 1999 1:57 PM