JVC YU30052-513-2 - Manual (Page 8)

8
DATE 1.1.00
TIME 0:00
A
GETTING STARTED (cont.)
–/+ SET
POWER
Date
Day/Month/Year
DATE .. Date setting is performed
Time
24-hour indication
TIME .... Time setting is performed
Clock Battery (Lithium) Removal/Insertion
This battery is necessary to operate the clock and to
perform date/time settings.
SWITCH OFF POWER
1 Switch off the unit’s power and remove the power
supply unit.
OPEN COVER
2 Open the clock battery compartment cover while
pressing the release tab.
REMOVE BATTERY (when replacing)
3 Insert a pointed, non-metallic object between the
battery and the compartment (
A ) and pull the
battery out.
INSERT BATTERY
4 Ensuring the plus (+) side is up, insert the supplied
lithium battery and push it in.
CLOSE COVER
5 Close the compartment cover until it clicks in place.
NOTE:
See “SAFETY PRECAUTIONS” (
੬
pg. 2) for information
on safe handling of lithium batteries.
Date/Time Settings
SELECT MODE
1 Set the power switch to CAMERA.
SET DATE/TIME
2 Press SET and the day blinks. Press + or – to choose
the correct day, then press SET to enter. Repeat to set
month, year, hour and minute.
•The date and time are both displayed for
confirmation. Then the time display disappears.
NOTE:
The clock does not keep time while the date and time are
blinking.