JVC YU30052-513-2 - Manual (Page 14)

14
FEATURE: Index Code Marking
PURPOSE: To give you automatic access to any
selected point on a recording. Auto
Marking and Manual Marking are
available.
OPERATION: Auto Marking
An index code is always marked to start
the first recording on a new date after a
cassette is inserted.
Manual Marking
1) Press VISS once to place index code.
INDEX blinks in the viewfinder
during marking.
NOTES: ● If VISS is pressed during Record–
Standby mode, the mark is placed
where START/STOP is pressed.
● If the date changes during a record-
ing, it becomes the first recording of
the new date and an index mark is
placed at that point.
FEATURE: AUTO PAUSE SYSTEM (GR-AX460
only)
PURPOSE: To automatically stop recording when
the camcorder is pointed down,
preventing accidental recordings of the
ground, your feet, etc.
OPERATION: 1) Set AUTO PAUSE to “ON”. When
the camcorder is tilted down by a
large degree from its horizontal
position during recording, the
Record-Standby mode is automati-
cally engaged. “AUTO PAUSE”
appears in the viewfinder.
NOTES: ● The Auto Pause System is also
effective when the camcorder is
pointed up, or is positioned upside
down.
● Auto Pause also works when the
camcorder is twisted by a large
degree to the left or right.
● When you want to shoot in any of the
aforementioned positions, make sure
you set AUTO PAUSE to “OFF”.
RM-V704U
(provided with GR-AX460,
optional for GR-AX260)
AUTO PAUSE
Record-Standby
Record-Standby
Record
Normal
Up
Upside down
Record-Standby
Down
START/STOP
VISS
RECORDING Basic Features (cont.)