JVC YU30052-513-2 - Manual (Page 34)

34
A
C
IN OUT
ᮣ 1 0:00:25
ᮣ 2
ᮣ 3
ᮣ 4
ᮣ 5
ᮣ 6
ᮣ 7
ᮣ 8
COUNTER 0:00:25
TOTAL 0:00:00
IN OUT
ᮣ 1 0:00:25 0:01:05
ᮣ 2 0:03:18 0:03:31
ᮣ 3 0:02:33 0:02:53
ᮣ 4 0:04:11
ᮣ 5
ᮣ 6
ᮣ 7
ᮣ 8
COUNTER 0:04:11
TOTAL 0:01:13
B
EDITING (cont.)
PREPARE CAMCORDER
2 Insert a recorded tape and set the power switch to
PLAY.
PREPARE VCR
3 Turn the power on, insert a recordable tape and
engage the AUX mode (refer to VCR’s instructions).
SELECT SCENES
ACCESS R.A. EDIT COUNTER
DISPLAY
1 Press PLAY/PAUSE, then press R.A. EDIT and the
counter display appears in the viewfinder and the
screen of the connected TV.
REGISTER BEGINNING OF SCENE
2 Press REW or FF to locate the beginning of a scene
you want, then press IN/OUT to register that point.
The data appears under IN on the display.
REGISTER END OF SCENE
3 Press REW or FF to locate the end of the scene and
press IN/OUT to register it. The data appears under
OUT on the display. The total time of the registered
scene(s) is displayed at the bottom of the screen.
REGISTER ADDITIONAL SCENES
4 Repeat steps 2 and 3 for each additional scene
(as many as 8).
MAKE CORRECTIONS
5 Press CANCEL during steps 2 and 3 to erase the
most recently registered point.
NOTES:
● There must be at least one second between an in-point
and its corresponding out-point.
● The camcorder prerolls during R.A. Edit, so there must
be at least 15 seconds of recording material prior to
any in-point.
● Blank portions of tape cannot be registered as in-points
or out-points.
● If it takes more than 5 minutes to search for an in-point,
the VCR’s Record-Pause mode is cancelled and editing
doesn’t take place.
● Pressing R.A.EDIT clears all in- and out-points from
memory.
● Leave a small margin for error around each in-point to
ensure the scene is recorded in its entirety.
CANCEL REW/FF
IN/OUT
PLAY/PAUSE
STOP
R.A. EDIT
To EDIT
To AUDIO and
VIDEO out
connector
To AUDIO and
VIDEO IN
connectors
If your TV/VCR has
the SCART connector,
use the provided
cable adapter.
VCR (Recording deck)
To
Remote
PAUSE
To Pause-In
RM-V704U
(provided with
GR-AX460,
optional for
GR-AX260)
Editing cable
(provided)
Audio and Video
cable (optional)
CANCEL
IN//OUT
VCR REC STBY
ON/OFF