JVC YU30052-513-2 - Manual (Page 5)

5
QUICK OPERATION GUIDE
SUPPLY POWER
Using the battery pack
1
Hook-on the battery pack’s top end to the
camcorder. (Charging procedure,
੬
pg. 6)
2 Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
PLAYBACK
1 Set the power switch to “PLAY”.
2 Press REW.
— The tape will automatically stop at the
beginning of the tape.
3 Press PLAY/PAUSE.
— Playback starts and playback picture
appears in the viewfinder.
•To stop playback, press STOP.
(For more details,
੬
pg. 30.)
Ⅲ Or simply play back the tape on a VHS
VCR using the Cassette Adapter.
੬
pg. 28
SHOOTING
1 Slide the LENS COVER open/close knob to
open the lens cover.
2 Set the power switch to “CAMERA”.
— The power indicator will light and image
will be seen in the viewfinder.
3 Press the Recording Start/Stop button.
— Recording starts.
• To stop recording temporarily, momentarily
press the Recording Start/Stop button once
again.
(For more details,
੬
pg. 12)
2
Push in.
1
Hook on.
BATT. RELEASE
3
1
PUSH
Insert.
EJECT
2
2
REW
1
Set to “PLAY”
1
LENS COVER
open/close knob
3
Recording Start/Stop button
2
Set to “CAMERA”
INSERTING A VIDEO
CASSETTE
1 Slide EJECT.
2 Insert a video cassette.
3 Press PUSH.
(For more details,
੬
pg. 9)
STOP
3
PLAY/PAUSE