Grounded equipment warning for ex series switches, Switches – Juniper Networks EX8208 User Manual
Page 308

Grounded Equipment Warning for EX Series Switches
WARNING: The switch is intended to be grounded. During normal use, ensure that you
have connected earth ground to the switch chassis.
Waarschuwing Deze apparatuur hoort geaard te worden Zorg dat de host-computer
tijdens normaal gebruik met aarde is verbonden.
Varoitus Tämä laitteisto on tarkoitettu maadoitettavaksi. Varmista, että isäntälaite on
yhdistetty maahan normaalikäytön aikana.
Attention Cet équipement doit être relié à la terre. S'assurer que l'appareil hôte est relié
à la terre lors de l'utilisation normale.
Warnung Dieses Gerät muß geerdet werden. Stellen Sie sicher, daß das Host-Gerät
während des normalen Betriebs an Erde gelegt ist.
Avvertenza Questa apparecchiatura deve essere collegata a massa. Accertarsi che il
dispositivo host sia collegato alla massa di terra durante il normale utilizzo.
Advarsel Dette utstyret skal jordes. Forviss deg om vertsterminalen er jordet ved normalt
bruk.
Aviso Este equipamento deverá estar ligado à terra. Certifique-se que o host se encontra
ligado à terra durante a sua utilização normal.
¡Atención! Este equipo debe conectarse a tierra. Asegurarse de que el equipo principal
esté conectado a tierra durante el uso normal.
Varning! Denna utrustning är avsedd att jordas. Se till att värdenheten är jordad vid
normal användning.
Related Topics
General Safety Guidelines and Warnings for EX Series Switches on page 263
•
•
Connecting Earth Ground to an EX Series Switch on page 167
Maintenance and Operational Safety Guidelines and Warnings for EX Series Switches
While performing the maintenance activities for EX Series switches, observe the following
guidelines and warnings:
•
Battery Handling Warning on page 283
•
Jewelry Removal Warning on page 284
•
Lightning Activity Warning on page 285
•
Operating Temperature Warning on page 286
•
Product Disposal Warning on page 288
Copyright © 2010, Juniper Networks, Inc.
282
Complete Hardware Guide for EX8208 Ethernet Switches