Juniper Networks EX8208 - Manual (Page 123)

CHAPTER 5
Rack and Cabinet Requirements
• Rack Requirements for an EX8208 Switch on page 97
• Cabinet Requirements and Specifications for an EX8208 Switch on page 100
• Clearance Requirements for Airflow and Hardware Maintenance for an EX8208
Switch on page 101
Rack Requirements for an EX8208 Switch
You can mount EX8208 switches on four-post racks or two-post racks. See Figure 33 on
page 99 and Figure 34 on page 99.
Rack requirements consist of:
• Rack type
• Mounting bracket hole spacing
• Rack size and strength
• Rack connection to the building structure
Table 39 on page 98 summarizes rack requirements and specifications for EX8208
switches.
Figure 33 on page 99 shows four-post rack installation. Figure 34 on page 99 shows
two-post rack installation.
NOTE: To manage airflow in a hot-aisle-cold-aisle data center setup, you might want
to use the customized rack solution for EX8200 switches offered by Chatsworth
Products, Inc.
97 Copyright © 2010, Juniper Networks, Inc.