Names and functions of parts – JVC BR-DV6000U User Manual

Page 8

[REMOTE/LOCAL] switch

This switch is used to select how BR-DV6000
is to be operated.
LOCAL

: Use this setting if BR-DV6000 is to

be controlled with the key operation
of the unit.

REMOTE : Use this setting if BR-DV6000 is to

be controlled using the edit control-
ler connected to the REMOTE 1 (9-
PIN) terminal or REMOTE 2 (12-
PIN) terminal.
When it is set to REMOTE, settings
can be performed at the REMOTE
(1/2) MENU screen to enable/dis-
able operation via the 9-PIN or 12-
PIN REMOTE terminal.
The 9-PIN REMOTE 1 terminal can
be selected using REMOTE SEL 9
PIN while the 12-PIN REMOTE 2
terminal can be selected with RE-
MOTE SEL JVC.

[INPUT SELECT] switch

This switch is used to select input signals.
DV

: For DV signals of the DV IN/OUT

terminal (IEEE1394)

LINE

: For inputting the composite images

of the LINE IN terminal and ana-
log audio signals.

Y/C (CPN) : For inputting the YC separate video

signal of the Y/C IN terminal and
the component video signal of the
COMPONENT IN terminal. The
selection of the YC separate sig-
nal or the component video signal
can be done with VIDEO INPUT
SEL in the VIDEO MENU screen.
For audio, analog sound is input.

[AUDIO OUTPUT] switch

Use this switch to select the audio channel from
the headphone terminal and the AUDIO OUT
terminal located on the rear panel.
This switch is valid in the following conditions.
• During playback of tapes recorded in the 32k

audio mode

• In the EE mode for DV input in the 32k audio

mode

• During audio dubbing
CH-1/2

: For outputting the sound of the

channels CH1 and CH2.

MIX

: For outputting the mixed sound of

CH1 and CH3 from the CH-1/3 AU-
DIO OUT terminal and the mixed
sound of CH2 and CH4 from the CH-
2/4 AUDIO OUT terminal.

CH-3/4

: For outputting the sound of CH3 and

CH4.

BR-DV6000

PROFESSIONAL

MENU

RESET

A.DUB

EJECT

COUNTER

AUDIO

INPUT

SELECT

MONITOR OUTPUT

REMOTE

LOCAL

CTL

MIX

CH-1/2

MIX

CH-3/4

LINE

Y/C

(CPN)

TC
UB

REW

STOP

REC

OPERATE

PLAY

PAUSE

DISP

SET

INDEX+

BLANK

CUE UP

HOLD

PHONES

REC LEVEL

CH-1/3

CH-2/4

MIC

INDEX–

Mini

8 7 6 5 4

NAMES AND FUNCTIONS
OF PARTS

– Front panel – (continued)

Memo

● To control BR-DV6000 with the SERIAL RE-

MOTE terminal or DV terminal, this switch set-
ting can be set up with REMOTE SEL SE-
RIAL or REMOTE SEL DV in the REMOTE
(1/2) MENU screen. (

☞

Page 75)

● If it is set to REMOTE, the buttons that can

be operated from the unit are selectable from
LOCAL FUNCTION in the REMOTE (1/2)
MENU screen.

Note

Switching is invalid during recording.

[AUDIO MONITOR] switch

Use this switch to select the audio channel for
output signals from the headphone terminal and
the AUDIO MONITOR terminal located on the
rear panel.
The output signal of the AUDIO MONITOR OUT
terminal is monaural.
L

: For outputting the sound of CH1.

MIX : For outputting the mixed sound of CH1

and CH2.

: For outputting the sound of CH2.

[COUNTER] switch

The switch changes the contents of the coun-
ter display of the

9 LCD and the monitor.

CTL : It displays the counter in hour, minute,

second and frame based on CTL (con-
trol signal).

TC : It displays the time code data.
UB : It displays the user’s bit (UB).

LCD

Ⅵ In the playback, still or search mode, it dis-

plays the playback image.

In the recording, recording pause, stop, fast-for-
warding or rewinding mode, it displays the in-
put image.

Ⅵ The following information is also dis-

played.

• Various types of information (status display),

e.g., operation mode, date/time, counter

• Menu screen
• Warning display
(For details,

☞

Page 20)

Memo

● Use the

DISP button to enable/disable the

LCD display and the display style.

● LCD-related settings, e.g., brightness adjust-

ment of the LCD, are performed in the DIS-
PLAY MENU screen.
(

☞

Page 39 “Setting the LCD display”)

(

☞

Page 82 “DISPLAY MENU screen”)

● If the same image pattern is kept displayed

on the LCD display for a prolonged period of
time, “ghosting”, the permanent etching of a
pattern on a display screen, may occur. To
prevent this, turn off the LCD display when it
is not in use.

Memo

● For the MIX setting, noise is sometimes gen-

erated. If it occurs, set it to CH-1/2 or CH-3/4.

● In the 48 K audio mode, it is fixed at chan-

nels CH1 and CH2 regardless of the setting
of the switch.

● In the AUDIO DUBBING PAUSE mode, sound

output is performed only from CH3 and CH4.

MONITOR OUT
output channel

AUDIO switch

MONITOR

MIX

OUTPUT

CH-1/2

CH-3/4

MIX

CH-1/2

CH-3/4

MIX

CH-1/2

CH-3/4

MIX

CH1

CH3

CH1/3 mix

CH1/2 mix

CH3/4 mix

CH1/2/3/4 mix

CH2

CH4

CH2/4 mix

Memo

In the following conditions, if this switch and the

AUDIO OUTPUT switch are used in combi-

nation, the AUDIO MONITOR OUT outputs the
sounds listed as in the following table.

• During playback of tapes recorded in the

32 K audio mode

• In the EE mode for DV input in the 32 K audio

mode

• During audio dubbing